Why for basketball,silicone bands

vor! As for the production process of silicone wristband, it is estimated that not many people have fully understood it. Pinshang Silicone explains the whole production process of silicone wristband. Design of artwork The design of artwork is generally based on the size of the sample artwork provided by the customer. Graphic drawing software, such as CDR or AI software, is generally used to make the artwork. If the customer cannot provide the sample artwork, we can cooperate with the customer to complete the design and production of the artwork free of charge according to the customer"s requirements. Open mold The mold opening is that the mold master creates an offset plate according to the designed artwork, then uses the offset plate to carve a copper worker, and finally carves a steel mold with the copper worker. Some hand ring craft moulds have a relatively high technical content and take a relatively long time to produce. Generally, the mold opening period is calculated by five days. With the mould, the production will be quick. Toner refining According to the color number on the international Pantone color card specified by the customer, our color mixing ratio is aligned and the color difference is minimal. Approval materials The materials required for each wristband are weighed by an electronic scale. Generally, the wristband weighs about 5.5 grams. Upper die production After the mould is finished, it is produced on the machine. After the mold is installed, the machine needs to be warmed up. A 9-mold machine produces about 15000 pieces per day. Quality inspection After the wristband is produced, the product shall be inspected and checked, mainly to see if it meets the specifications. If it does not meet the specifications, it will be discarded. deburring Each wristband is produced with a residual edge. After the quality inspection department passes the inspection, the product is sent to the post-process department for trimming. (Average trimming quantity per person per day is about 3,000 pieces). Finished product inspection After the edge is repaired, the finished product is obtained. It is also necessary to send the finished products back to the quality inspection department to check the trimming quality. If there are any unqualified products, they will be scrapped. Packaging After the repaired products pass the inspection, they shall be packaged according to the customer"s requirements. Packaging is divided into PP bag independent packaging and naked packaging. Both are 100 pieces in a pack. Usually 20 packs per carton (2,000 pieces) are standard export containers. Packing is generally required by customers. Inspection before sealing After the packaging is completed, the quality inspection department will check the quantity. if there is no problem, seal the case and send it to the warehouse for delivery.             silicone-wristbands-size-chart

y colors we can choose from , let me give answer as follow. The Pantone is the international standard color chart and color authority famous around the world. It is widely used in printing, textiles, plastics, graphics, digital technology and other fields as international standard language for the exchange of color information. The Pantone is an authoritative standard for selecting, determining, matching and controlling ink color with color number and color mixing formula of more than 1000 colors. When you choose a pantone color for the bracelet then the engineer will mixed the color according to the formula of color chart. Add the mixed color to the silicone then a bracelet of your color completed. Comparing  the bracelet with the color chart to see if it is the right one is the direct way to check it.   montre-homme-bracelet-siliconecustomized-rubber-bracelets

strong Foundation had "Livestrong" printed on the bracelets and sold them to raise cancer awareness. Following the popularity of Livestrong bracelets, other organizations have jumped on board, creating their own bracelets to raise money and awareness for different causes. Printed wristbands are by far the most economical choice. Printed bracelets start with a blank wristband and are then silk-screen printed. The "technology" for screen-printing wristbands has come a long way. The dyes used today actually penetrate the silicone rubber of the wristband. Many people are under the impression that the print which is used on printed bracelets is cheaply painted on and will crack or flake off. With a reputable custom silicone bracelet manufacturer, this simply is not the case. You can expect the printing to last the lifetime of the silicone wristband itself. Printed bracelets dosilicone bands not require a mold to be manufactured. Instead, a template is produced that is used to apply the custom design onto the bracelets. Because a template is used rather than a mold, printed wristbands are less expensive with quicker turnaround times than debossed and embossed wristbands. Although this is a very simple process, there has been an important improvement in screen-printing silicone wristbands since more elaborated dyes and effects penetrate the silicone basics of rubber bracelets. So, the messages printed on these basics of rubber bracelets never fade or lose their original color.             embossed-printed-wristband

how to make wristbandssilicone bandsttps://www.24hourwristbands.ca/upload/2019/20190509/153637_7773.png" width="350" height="350">